Tractor Talk Discussion Board |
Re: Pipeline Question
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by noncompos on January 27, 2007 at 16:53:40 from (67.42.238.52):
In Reply to: Pipeline Question posted by jmh on January 27, 2007 at 10:32:08:
Giving up prime development land isn"t quite the same thing as producing fields or land that has little chance of productive use or development, and even tho they just want an easement you"re giving it up for any hope of building on it. Just off the top of my head consider: how much buildable space you"ll lose, not just because of the pipeline building restrictions but from city/county/state restrictions (if any) AND the people who have no intention of living next to or near a hi-pressure pipeline; whether your terrain would require any additional necessary slope/embankment areas and/or any access rights over adjacent lands (often in the "routine clauses" of the easement document). If treed area watch for "danger trees" rights, whereby gas co can cut trees that might fall/blow down onto valving or pumping installations. But the bottom line is: you should not only talk to anyone you can along the pipeline route to see what they"ve been told/offered, but then get legal advice and, ideally, representation. Good luck.
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|