Tractor Talk Discussion Board |
Re: injector pump on ford 5610
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by RodInNS on January 29, 2007 at 20:23:44 from (142.177.80.11):
In Reply to: injector pump on ford 5610 posted by awestphall on January 29, 2007 at 19:56:16:
You can go to www.newholland.com/na and roam into the parts section. You should find the parts lookup, search for 5610, and then go to fuel systems, '81-10/85. That may or may not give you a breakdown of the pump. They've become reticent about selling any parts for pumps anymore, so they may simply show a unit, and NSS (not serviced separately, or something to that effect.... If it's the seals on the throttle shaft you're after, I think an o-ring kit would probably have them, or a diesel specialist. Just cut the wire seals on the pump cover, remove the linkages, and then the cap nuts, and carefully remove the cover. Take note of the location of the govenor spring.... That's about all the help I can give you, as I'm no pump expert. There are some here. It's a DPA pump for those interested.... Rod
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|