Tractor Talk Discussion Board |
Re: O/T Auto transmission service
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Brokenwrench on February 02, 2007 at 15:58:29 from (69.128.199.192):
In Reply to: O/T Auto transmission service posted by 37 chief on February 02, 2007 at 13:28:47:
What type of vehicle is it? Most fords have a drain plug in the converter, if that`s the case you can get most of the fluid out by dropping the pan, changing the filter and draining the converter. Most of the rest don`t have a drain plug so you`ll only get about 1/2 the fluid out. Flushing isn`t really flushing anything it`s just exchanging the fluid. With the shops that flush be sure and ask if they`re changing the filter or not. The price will probably reflect that. Flushers tie into the cooler lines and exchange the fluid, so dropping the pan isn`t necissary. That`s how some of the quick lube places can advertise a $50.00 trans flush special. To me not changing the filter is kinda like taking a shower and puttin dirty underwear back on. I don`t have a fluid exchanger(flusher) here cause alot of shops I work for do. I don`t see a problem with doing it either way, if you`re gonna just drop the pan and filter, do it alittle more often. Like someone mentioned earlier I advise people to just periodically check their fluid. If it`s nice and red it`s still ok, if it`s real burnt changing it probably ain`t gonna do much good. ATF will start to break down and not really burn, it turns a kinda amber/brown color. That`s a good indication it`s time to change fluid. I haven`t seen any problems happen from someone changing fluid on a good working trans as preventative maintainance. The guy that comes into my shop smokin mad cause the shop down the road did a fluid change and now his trans slips is usually not telling the whole truth. They end up admitting that, well it was slipping alittle, so I thought I`d get the fluid changed, but now it`s worse. Unless it`s a vehicle that has an issue with sticking valves, changing fluid after the first signs of a problem is pretty much a waste of money. Anyway, get me talkin transmissions and I`m like the energizer bunny, just keep goin and goin. Good luck Brokenwrench
Replies:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|