|
Tractor Talk Discussion Board |
OT another safe question
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by PhilcaseinWPa on February 07, 2007 at 06:29:09 from (146.186.55.48):
The people on this board always amaze me with their wide range of knowledge. After reading Gary's posts about safes I got to thinking about an old safe I have. I think it was my great grandfather's. The safe is made of steel and concrete and is on metal casters. The outside is about a 2 foot cube but the inside is small with 3 small shelves big enough to hold 1 box of checks per shelf and a taller copartment along side that can hold some larger envelopes (8" x 11") or so. For years the safe sat and was never used because we didn't have the 'key'. It was open but you needed the key to lock it. I found the key one day and now I can use it. The key is not the usual key. It is a brass bar with 5 or 6 pins of various lengths sticking out one edge. The bar is about 1 - 1.25" and the pins are at most 3/8" long. To lock or unlock the safe you have to stick the bar into a slot in the dial and turn the dial. Clockwise unlocks it and counterclockwise locks it. Are any of you familiar with this type of lock? I would like to get a spare key made but I don't know if it has to be part brass or why if it does or who could make one. Any comments appreciated.
Phil
Replies:
Home
| Forums
Today's Featured Article -
Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
