Tractor Talk Discussion Board |
Re: SKID LOADER?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by 135 Fan on February 15, 2007 at 15:22:07 from (68.149.35.103):
In Reply to: SKID LOADER? posted by rustin on February 15, 2007 at 13:01:07:
What ever machine you buy, make sure to sit in it with a dirt bucket on it. With the bucket flat on the ground, make sure you can easily see the bucket cutting edge. It allows you to do much more precise work a lot faster. It may not seem like much but it is. With a snow bucket you can't see the edge. On some of the older JD and New Holland as well as others you are almost sitting down inside them. A higher seat is way better. For picking up bales a longer wheel base machine will be more stable. A machine will tip easier the higher it is lifted. I've found out the hard way loading wet clay in a dump truck. Luckily the bucket fell onto the outside of the box and not completely to the ground. It was a little scary but at least I had enough experience to get the bucket dumped. My machine has a seat bar that goes all the way across the front of you. Some machines have two little arms that turn. They're just a gimmick. A good seat belt is a must as well. Get a universal quick attach. Then you can go to Bobcat or anywhere else that rents attachments so you don't have to always buy them. When you get it don't try to go real fast. Going fast and doing a precise job come with experience. A lot of first timers try to show off how fast they can go. A tractor loader is no substitute for a skid steer and vice/versa. While some jobs can be done with both, they are made to do different types of work. Most machines are pretty good. See what dealers are around for parts etc. They can tell you of problem machines as well. Hope this helps. Dave
Replies:
Home
| Forums
Today's Featured Article -
Grain Threshing in the Early 40's - by Jerry D. Coleman. How many of you can sit there and say that you have plowed with a mule? Well I would say not many, but maybe a few. This story is about the day my Grandfather Brown (true name) decided along with my parents to purchase a new Ford tractor. It wasn't really new except to us. The year was about 1967 and my father found a good used Ford 601 tractor to use on the farm instead of "Bob", our old mule. Now my grandfather had had this mule since the mid 40's and he was getting some age on him. S
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|