Tractor Talk Discussion Board |
Re: first time tractor to mow 9 acre pasture
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by 135 Fan on February 25, 2007 at 08:32:43 from (68.149.46.121):
In Reply to: first time tractor to mow 9 acre pasture posted by Frank King on February 25, 2007 at 01:40:16:
A 135 MF would be an excellent choice. Unless you have a loader you don't need power steering. The manual is a lot more trouble free as well. What ever tractor you consider get a live PTO. They allow you to get the mower up to speed without the tractor moving forward. Very important in heavy grass. A tractor in the 35-45 hp range will handle a 6 ft mower and also do a lot more other work like discing or harrowing. Walk the field first and look for rocks and holes and other obstacles. Clean up what you can and remove all rocks. If it is fairly smooth and basically just a big field of grass I would suggest spending a little more and get a 3 pt. hitch finishing mower with rear discharge. I have a Sicma that is made in Italy. It was comparable in price or cheaper than other makes but is built way better without sharp corners on the bottom of the deck for grass to get caught in. The best thing about a finish mower is it has 3 blades that are easy to remove for sharpening and has 4 gauge wheels for adjusting the height of cut. You just put it down and go. If there is a lot of trash in the field go with a large single blade model. A dealer could help you to choose. A flail mower would be excellent but they are a lot more money. MF tractors have the best 3 pt. hitch. Ford are OK. Buy a popular tractor. Then a lot of people on here can help you if you have problems. Any MF with the 3 cylinder Perkins (preferably diesel) would be the ultimate tractor. 135, 235 ,245, 230, 240 etc. Again a dealer could tell you what are things to look for. Big Dean also has a guide on his website. Hope this helps. Dave
Replies:
Home
| Forums
Today's Featured Article -
A Belt Pulley? Really Doing Something? - by Chris Pratt. Belt Pulleys! Most of us conjure up a picture of a massive thresher with a wide belt lazily arching to a tractor 35 feet away throwing a cloud of dust, straw and grain, and while nostalgic, not too practical a method of using our tractors. While this may have been the bread and butter of the belt work in the past (since this is what made the money on many farms), the smaller tasks may have been and still can be its real claim to fame. The thresher would bring in the harvest (and income) once a y
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|