Re: Trailer Brake Problem

Posted by souNdguy on April 04, 2007 at 12:49:44 from (12.65.120.80):

In Reply to: Trailer Brake Problem posted by Bguy on April 04, 2007 at 12:36:23:

COMMON problem.. it stems from the fact that there are (2) 7 pin plug standards ( why call it a standard if it ain't???)

Anyway.. if you have a hOppy type adapter plug to take yer traier 6 pin to a 7 pin for the truck ( tsc / walmart / autozone ).. you pull a couple screws out of the adapter and a rubber ring off of it and pop one side of the cover off. The you look at the connections inside it. All wires are permanently mounted pin to pin EXCEPT 2 wires... REVERSE them. then button it back up.

My yukon was like this.. it bumfuzzled me. Whenever i plugged the connector in.. my controller said ERR and the brakes were locked.. because constant battery power was being applied to them.

post back what you find..

Soundguy

Replies:

• Re: Trailer Brake Problem Bguy 14:14:16 04/04/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]