Tractor Talk Discussion Board |
Re: O/T Question - What are the purpose of lightni
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by NE IA Dave on April 05, 2007 at 16:41:48 from (12.215.72.127):
In Reply to: O/T Question - What are the purpose of lightning r posted by Turke Bros. Farms on April 05, 2007 at 07:16:00:
I'm confused by all the facts. The insurance companies in our area say if you have rods they must be grounded. Many ground rods have the copper wire broke off. I have repaired a barn after a strike, and I sure do not believe a rod was intended to take a strike. The strike took on the rod on the west (top) side of a large barn. It went across the total length of the barn following the cable. It then went to the eve and towards the ground. The path was clear as the asphalt and wooden shingles looked like a mole had dug under to the sheathing. At the eves it took the corner post 8 X 10 in the barn and exploded it. There was no fire, although some charing in the path. Right or wrong we were always told the rods took out the static electricity. It has been explained that if you hold a wire that is grounded, you can rub your feet on a carpet all day and never hear a snap of static electricity. It does make some sence, right or wrong. Most of the older folks will not sleep at night if you remove the rods for roofing. I must say we seldom put them back on now days however it be, right or wrong. With todays copper prices I kind of think it may be worth while to haul them away for scrap. Regardless if they did not work, there must have been some prety good marketing skills involved.
Replies:
Home
| Forums
Today's Featured Article -
Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|