Re: excessive sparks

Posted by BLW on April 12, 2007 at 07:17:21 from (4.156.33.249):

In Reply to: excessive sparks posted by brad siegmund on April 11, 2007 at 12:58:36:

if the wire has one of those pinch or solder on ends-- make sure the wire is tight in the wire end-- if not you can tighten all you want and it will not help-- we had a ford that wouldn't start good et turned over slow== after racking my brain I found the wire on the ground end wasn't making good contact in the wire end- pinched it with vise grips and took care or the prob. of course we put a new cable on

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]