Tractor Talk Discussion Board |
OT/ wood splitter / widow maker
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by NE IA Dave on April 12, 2007 at 21:10:03 from (12.215.72.127):
Lots of snow and a bad frame of mind today, so wasted my day for the most part, got to thinking of a machine that my wifes grandfather had a picture of. This was a wood splitter made from a old junk 6-10 hp hit and miss engine. Those are pretty heavy duty, with flywheels that create alot of energy. This one was a junk engine that was belted from a tractor. The flywheel had a wedge welded or bolted to it that rotated between two large chunks of steel. A small table held the chunk of wood, the flywheel with the wedge swung around and clobered the chunk of wood. the wedge fit between the two chunks of steel, but the wood couldn't. The flywheel never stopped so they would walk up and throw the chunk of wood, and run away as the wood gernaded into orbit. Every year someone got hit with a flying chunk, but all wound healed eventualy I guess. Grandpa said it never found a chunk that it couldn't split, nor a skull for that matter. He did mention that regardless of the out come it all happened very fast. Judging by the size of the wood pile in the picture, the dumb thing must have been real popular. One of my first questions was why not have a long chute to roll the chunks down, or at least set a few fence posts to duck behind. Grandpa said yea that probably would have been a prety good idea. As I think back at all the saftey features we don't even pay attention to.
Replies:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|