Re: Block Repair

Posted by Princeton Bill on April 13, 2007 at 10:50:21 from (64.12.116.14):

In Reply to: Block Repair posted by Eric Hosette on April 13, 2007 at 10:22:23:

Lock N Stitch. Go to www.locknstitch.com. you drill holes, tap them and plug them. You drill out part of the previous plug down the length of the crack.

It works great. We did it to a block that had a crack that had been ground out and welded on . It is fairly easy to do and you can do it with the engine in the tractor (provided you have access to the crack.

I know there are other methods that work, but our attempt at welding wsa a disaster and JB WELD did not hold.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]