Re: 4020 sycro w/ loader??

Posted by Mike M on April 30, 2007 at 05:49:41 from (24.140.28.219):

In Reply to: 4020 sycro w/ loader?? posted by Ken McCormick on April 30, 2007 at 04:05:04:

Yes you will loose flow on a syncro range when you push in the clutch because the tranny pump quits turning. A power shift does not disconnect the clutch as the pedal is hooked to an inching valve.
Time you can run a loader with the clutch pushed in will vary from tractor to tractor. Ours does pretty good and if you do run out of oil just flip it into neutral and let the clutch out.

Replies:

• Re: 4020 sycro w/ loader?? Gerald J. 14:06:12 04/30/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]