|
Tractor Talk Discussion Board |
Re: Pulling a Hay wagon
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by B.C. on October 20, 1999 at 08:11:14 from (131.167.75.193):
In Reply to: Pulling a Hay wagon posted by Craig on October 20, 1999 at 07:55:54:
It can be done a couple ways. On our 9N we used to use the multiholed job between the lift arms. We would also use a couple straps that went from the top link pin down to the drawbar end. This then kept the drawbar at a fixed height and helped it not to swing much. But it would still get pushed sideways a little if backing a wagon against any great amount of resistance. On our MH50 we use a "swinging drawbar" but put bolts on either side of it to limit the motion. Then if you have to back a wagon, the drawbar won't flop around and there will be some control of the situation. If you're just pulling the thing around there's not a lot of difference, but I do prefer the swinging drawbar.
Follow Ups:
Post a Followup
|
