Fence corners

Posted by Rick Kr on May 13, 2007 at 19:21:24 from (67.108.90.99):

Kids have talked me into a 100" x 100" duck pen, built around a little water hole.

I havent built a fence since I was a kid, handing tools mostly.

I have the corners posts set (6"). Should I build a standard H corner and drill through the horizontal brace and use re-rod? I think that is what I remember. Then just leave a little a little rod exposed to wrap the wire around so it doesnt slip?

Not sure if H corners are overkill for 100x100. But I figure you still need them if you are going to stretch the fence at all.

Thanks,
Rick

Replies:

• Re: Fence corners Rick Kr 09:18:53 05/14/07 (0)
• Re: Fence corners Mike (WA) 08:31:39 05/14/07 (0)
• Re: Fence corners NEsota 06:26:14 05/14/07 (0)
• Re: Fence corners Steve Crum 20:08:50 05/13/07 (1)
  • Re: Fence corners in-too-deep 20:58:33 05/13/07 (0)
• Re: Fence corners Incorprated 19:45:46 05/13/07 (3)
  • Re: Fence corners Rick Kr 09:21:03 05/14/07 (0)
  • Re: Fence corners RayP(MI) 20:25:10 05/13/07 (1)
    • Re: Fence corners Uncle Ernie 20:56:11 05/13/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]