Re: tire pressure in duals

Posted by JoeBob/IN on May 18, 2007 at 19:38:04 from (216.117.22.1):

In Reply to: tire pressure in duals posted by R.J. on May 18, 2007 at 16:46:49:

I just read on one of the tire manufactures sites that the old thinkin was to have a few less psi in the dual tires but now to run equal amounts in all. Are they bias or radials. What is the load per tire... what tractor and what kinda equipment (pull type or mounted)? It all depends. No less than 12 psi if bias tires but you could need near 20 psi with large equipment. Possibly as low as 6 psi with radials! All depends so let me know and I can probably calculate for ya but when you change useage of tractor, like taking off duals or going from draw bar pull to 3 pt you will have to adjust psi!

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]