Tractor Talk Discussion Board |
Re: Queston regarding small pole shed cost
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Bob Farrell on May 21, 2007 at 06:29:39 from (70.234.141.77):
In Reply to: Queston regarding small pole shed cost posted by DAN9-Midwest on May 20, 2007 at 16:35:49:
I would suggest you look at the all steel round top quonset buildings. They come in DIY kit form in just about any size and configuration you want (I put up a 60' X 100"). A building the size you want can be erected by you and a couple buddies in two/three days (after you complete the slab). Snow/Wind loads are great. If you select the design that has 6' or so vertical side walls the interior space is almost 100% usuable. The galvalume coating on the steel ensures a long, maintenance free life and the reflective quality makes for easy lighting. After researching extensively I came to the conclusion it was the way for me to go considering total cost (site preperation, slab (contracted 6,000 square feet - 5-6" rebar and plastized re-inforcement), kit cost, and installing). There are several companies selling/making these things and they seem to try to get very competitive for on-site delivery. I was 64 young years old when I got mine and with four guys we had a lot of fun putting it up. By the way-rodents,termites, and bugs of all kinds seem to shy away. No rotting timbers, no painting, etc. I got mine from SteelMasters out of one of the Carolina's. Hope this helps. Let us know what you select. Bigger the better. Bob Farrell
Replies:
Home
| Forums
Today's Featured Article -
Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|