Re: Building hay wagon rack

Posted by Leroy on June 25, 2007 at 19:33:13 from (209.143.52.175):

In Reply to: Re: Building hay wagon rack posted by Don-WI on June 24, 2007 at 13:05:44:

They sure look like the same type I have, mine are 16" and they like to break the edge of the wheel right where the bead seated to the center of tire and the outside part of bead, right in that bend. 2 of four are welded at that point and a third borke so bad I had to have the rim removed from the disc and anouther welded on. None to be found here and the trailers the Hobart welders were mounted on used the same rim. Coop was a 5 lug and slightly smaller bolt circle.

Replies:

• Re: Building hay wagon rack Don-Wi 01:14:00 06/26/07 (1)
  • Re: Building hay wagon rack Leroy 19:29:14 06/26/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]