Tractor Talk Discussion Board |
Re: O/T Painting Aluminum
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by MarkB_MI on July 02, 2007 at 04:18:44 from (216.234.126.30):
In Reply to: O/T Painting Aluminum posted by 37 chief on July 01, 2007 at 12:49:15:
Why not just leave the gate unpainted? Putting a finish on aluminum that will hold up is a lot of aggravation. For the best possible corrosion resistance, you need to clean, etch, alodine and prime the metal prior to applying a topcoat. Alodine is nasty stuff, you can simplify the process if you use a self-etching primer. I suggest that you go to an automotive paint store and use whatever they suggest. Here's how I prep aircraft parts: 1. Clean the part using soap, water and Scotchbright. The part is clean when de-ionized rinse water runs off the part in sheets, rather than beading up. 2. While still wet, dip in Alumiprep 33, which is a phosphoric acid-based cleaner/etcher, for about 3 minutes 3. Rinse in de-ionized water. 4. Dip in Alodine 1201 for about five minutes. 5. Rinse in de-ionized water and dry. 6. Prime with epoxy or zinc chromate primer. 7. Finish with whatever topcoat you like. Alodine and Alumiprep are trade names, most paint companies like PPG sell their own versions of these products. The problem with aluminum is that it starts to oxidize the instant bare metal is exposed to air. This oxidation is what protects it from further corrosion, but it also prevents paint from sticking. Hence the need to etch and alodine, or to use a self-etching primer.
Replies:
Home
| Forums
Today's Featured Article -
Identifying Tractor Smells - by Curtis Von Fange. We are continuing our series on learning to talk the language of our tractor. Since we can’t actually talk to our tractors, though some of the older sect of farmers might disagree, we use our five physical senses to observe and construe what our iron age friends are trying to tell us. We have already talked about some of the colors the unit might leave as clues to its well-being. Now we are going to use our noses to diagnose particular smells. ELECTRICAL SMELLS
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|