Re: Horsepower needed for bushogging

Posted by RAB on July 11, 2007 at 11:30:00 from (195.93.21.42):

In Reply to: Horsepower needed for bushogging posted by Sunny 4 acres on July 11, 2007 at 09:58:18:

You are looking for us to give you an excuse to buy bigger? It is the operator that overloads a machine.
Your tractor will only produce the full 55 HP with full throttle and the governor wide open as well. The machine should be protected against over-torque by the shearbolt. You could run it on a 150HP tractor if you wanted. It is the inexperienced or thoughtless operator that would overload the machine. The bigger problem is not having enough power available to drive the machine, overloading the tractor and then the machine, as it will lose rotational speed energy and not cut efficiently. Remember, you can own a Ferrari but don't have to drive everywhere at 150mph!
RAB

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]