Tractor Talk Discussion Board |
Re: MSD or other?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by buickanddeere on August 09, 2007 at 09:23:19 from (216.183.155.64):
In Reply to: MSD or other? posted by bm3501466 on August 08, 2007 at 18:18:00:
If you want to really do it right and eliminate spark scatter. That's timing variations. Caused by gear lash, bushing play and shaft windup/wind down caused by each cylinder firing. There is a reason why auto manufactures read the engine position from crank sensors. And gone away from using distributers altogether. Use an inductive pickup on the flywheel and and electronic unit controlling advance. MSD fires the plug extra times at low rpms. This gives another chance for ignition should the mixture be plenty lean or rich. or if the plugs are loaded up from idling too rich & cold. MSD can reduce the tendency of detonation/knock. Sometimes the same power can still be obtained with an MSD and a couple or a few degrees less advance.
Replies:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|