Re: OT--Trailer Brakes

Posted by Doug N on August 12, 2007 at 07:37:05 from (64.12.117.74):

In Reply to: OT--Trailer Brakes posted by David in TN on August 11, 2007 at 09:31:38:

Yes, most below are right. It's called caging the brakes. It's a special T-looking bolt. Stick the T into the center hole in the back of the pancake chamber, give it a quarter turn and try to pull it out. If it won't come out, you are locked in and can start turning the nut in.

When you put it in, make sure the nut is backed all the way off to the end of the cage bolt. You will have to turn that nut d*mn near all the way to release the brakes.

You can air it up, but it will take alot longer to plug fittings on one side, and make adapters to hook air line up.
Doug N

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]