Tractor Talk Discussion Board |
1086 wheel hubs
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by DMont on August 12, 2007 at 15:45:34 from (72.24.77.157):
I have a problem with a wheel hub wedge ramp on a recently purchased 1086. I also have access to wheel hubs from a 4386 and want to use those on the 1086. The axle part numbers are the same which tells me they will interchange. The 4386 hubs are stronger with two bolts to tighten the wedges onto the axle. This would require the 4386 wheels as they are hub mounted. One other difference is they are 20.8 x 38 and the 1086s are 18.4 x 38. I like the 4386 set ups better but they will probably not adjust to required row crop measurements. I don't do any row crop so this wouldn't bother me. Can anyone see problems?
Replies:
Home
| Forums
Today's Featured Article -
12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|