Posted by JPatton on August 25, 2007 at 21:03:23 from (69.76.151.93):
In Reply to: Re: LED Trailer Lights posted by TomH in PA on August 25, 2007 at 06:08:16:
Tom - I feel I need the bright ones because of the mounting location and angle where the rear tail/brake lights are. The trailer builder has them in a piece of 6" channel iron at the rear of the trailer. The problem is that the mounting surface is not perpendicular to the ground. It is at the same angle as the beaver tail so the lights are pointing downward. The optics in the lenses are set to have the lamps at 90 degrees to the ground. Mine are not. The are also very low. Only about a foot off the ground. This give the traffic behind me a very soft light. People are always coming up on me very fast then they need to brake to keep from running over me. I just thought a brighter light would help.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
