Tractor Talk Discussion Board |
Re: Tractor Building ...what to do?
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Steve Hansen on December 03, 1999 at 17:34:49 from (208.21.138.240):
In Reply to: Tractor Building ...what to do? posted by truck on December 02, 1999 at 14:02:56:
Truck, I am going through the same decision process as you right now. Looking at a 10 high 30 x 40. All metal buildings are about 1/3 higher than pole buildings in this size. For pole buildings I am getting quotes in the $9,500 to $10,000 range and around $14,000 for an all steel building. Quoted 8 x 10 overhead door, walk door, insulation, and gutters. No electric wiring or plumbing. Have also looked at a hybred metal truss system (http://www.adamstruss.com) with wood perlins. About $6,500 for the package and a contracted slab. Lots of options. I have been building a house for the last six months. May go with a turn key pole building. Up in a week they say.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|