Posted by Jack G on December 02, 2007 at 13:48:59 from (69.137.45.255):
I have a JD 755 (diesel)small utility tractor, and a JD hydraulic 32 logsplitter. There are no auxillary hydraulic connections to hook the two lines up to. I do have a hydraulic bucket on front and three pt hitch.
I was thinking of disconnecting either the lift or tilt hydraulic connection (probably tilt since it is a fore and aft control)and hooking my two logsplitter lines in place of these then pushing the tilt lever forward and held tied in that position to enable the hydraulic oil to enter the logsplitter using the tractor pump.I realize I will have to check the oil level after this to assure enough is present an to add as necessary.
Does this sound viable or have I missed something. I certainly do not wish to cause any damage to the tractor or splitter.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: Black Tire Paint - by Staff. I have been fortunate in that two of my tractors have had rear tires that were in great shape when I bought the tractor. My model "H" even had the old style fronts with plenty of tread. My "L" fronts were mismatched Sears Guardsman snow tires, which I promptly tossed. Well, although these tires were in good shape as far as tread was concerned, they looked real sad. All were flat, but new tubes fixed that. In addition to years and years of scuffing and fading, they had paint splattered on
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
