For that ammount of ground, a pivot will most likely be difficult and expensive to set up. If you are really serious about a pivot, look google up on the web and see if you can find some prices on used pivots. They are not cheap!
If it were me, I"d use handlines. 3 inch handlines are relatively cheap (~$25 for a used 40 ft stick and you might even be able to use 2 inch lines that are ~t $15 a stick)and is a breeze to handle.( I have 3 inch and 4 inch and the 4 inch is really tough for a long in the tooth guy like me to handle but I manage to do it on pride!). You"ll a need a pump that can supply about 7.5 gpm PER SPRINKLER HEAD at 40 psi at the head. You"ll require minimum of a 4 inch mainline from the pump to the field with valves at 60 ft intervals and this will cost you ~$50 per 30 ft stick. You"ll need valave openers that match your mainline risers AND handlines. A pipe trailer to store it on is also nice but for the small ammount of pipe you can build a rack to store it on near the field.
Opinions are like belly button-everybody"s got one.These are my opinions, for what they are worth.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
