Posted by 135 Fan on December 24, 2007 at 12:28:50 from (68.149.38.173):
In Reply to: hydraulics question posted by kevin v on December 24, 2007 at 12:00:51:
Stop what you're doing or you could have real expensive repairs. The first thing you need to do is find out if your tractor has open or closed center hydraulics. I thought JD used a lot of closed center systems but don't know about your specific tractor. Each type of system has to have the proper type of control valve to run it. Some valves can be easily converted from one to the other. Some can't be. You need to talk to the JD dealer to find out what type of system you have and you need to talk with an experienced hydraulic shop to find out what type of valves the hoe has and most inmportantly, how to hook everything up properly. I am sure JD hydraulic pumps don't come cheap. Especially if they are for a closed center system. If you just have a disc or something with only a cylinder that runs off the remote couplers it doesn't matter what type of system. Any time you hook up another valve to control the cylinders, all the components have to be set up the same. You can't mix and match open and closed center pumps and valves. The whole system has to be compatable. Hopefully you'll get this before you try to run your tractor. Wouldn't want to see you have spend a big chunk of cash for repairs right after Christmas. Dave
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
