Posted by Mitch B on December 30, 2007 at 07:16:48 from (72.82.38.56):
Just sold my 8N of 21 years, now I'm looking at a used JD 4310 w/loader (2003). It has 1085 hrs and is out of a rental fleet, It has some cosmetic damage, hood is cracked, needs new grill, adjustable top link is bent. I priced everything from the local dealer at around 750.00. I drove the tractor and operated the bucket, it all seems to work fine, however both front and rear rims on the inner side and on the right side of the tractor (looking from the rear) had what appeared to be dirty grease up around the axles. Is this leaky seals and why would it be on one side, this also is the side the link is bent on. My main use is cutting a 3 acre pasture with a 60in. BEFCO mower deck and moving gravel and mulch around the house. Its priced at 10000 or should I look for a 790, I'll put around 300 hrs a year on what I get. Just wanted some advice.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
