what i did was i had beef befor i bought my milkers. i sold some beef now and then and got good land and crops going before i bought the cows. bought all or most of my machinery before i bought dairy cows. still have some money issues but at least i don't have to buy feed. try to avoid cows that come from local markets. my experiences with buying from the local sale barn is that they are mostlikely sick and/ or don't produce much. i bought all my cows from a retireing (SP? :( ) farmer. most were good but i sold some so so cows and since brought some of my first born heifers in fer milkin' now. or you could by real young heifers and raise them up and breed them and such. there are many different ways of going at this. just choose the one that fits your budget. just whatever you do' i would suggest no having a bull for breeeding. they are very tempermental. they also make these neat heat detectors that are scratchoffs so when a cow is in heat, and the other cows are riding, you can tell good luck DF in WI
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
