Tractor Talk Discussion Board |
Re: Re: First Tractor Advice
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by bbott on December 26, 1999 at 18:53:56 from (206.13.45.106):
In Reply to: Re: First Tractor Advice posted by bo on December 26, 1999 at 07:55:56:
If you don't have the tools/shop/experience/patience to keep the old stuff going, then bite the bullet, shop carefully and for about 10 grand you can get a late model used Kubota...25 to 35 hp and 4wd with the stuff you want.. Also, if you don't have the skills and tools to do it yourself, make sure you have a decent dealer in your area for whatever you buy. I live in the Pacifc NW too, and the ol' JD backhoe has rescued the MF 165 and 245 from the boggy lower 40 on a pretty regular basis. If I had the bucks, I'd opt for 4wd too.... but for now, I just have to be careful and keep the backhoe handy with the chains & cables.
Follow Ups:
Home
| Forums
Today's Featured Article -
Measuring with Calipers - by Staff. The legs of inside calipers are curved outward at the extremities to facilitate measuring small holes, while outside caliper legs have a large curve inward to increase their capacity for large work. Firm-joint calipers are adjusted approximately by the hands and then set to the feel of the work by tapping them on a metal surface. It is a common practice when opening calipers by this means to tap the top of the joint. It is better, if possible, to tap the inside of the legs, as repeated blo
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|