Tractor Talk Discussion Board |
Re: First Tractor Advice
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by bo on December 26, 1999 at 21:28:28 from (12.77.133.207):
In Reply to: First Tractor Advice posted by Steve on December 26, 1999 at 07:41:30:
Steve-you got advise from a bunch of people from new tractor guys to old tractor buffs. If you are mechanically inclined then by all means deal with something old that can be had for 4-5k. If you aren't then crank your buget up and buy a compact with bucket and power steering and 2-3 three range transmission and a live pto and 4wd. You get buried in mud you can always curl the bucket and push the puppy out and not have to go back and get something to pull it out with. Trust me, I've done it. I would stick with the compact line in the 20-30hp range and a major brand even if it does cost more, in the long run you'll be happier. These tractors will weigh in about 2000-4000lbs depending how the much extra weight is loaded in tires. You can add on just about any implement you want over time cause they'll have the popular cat.1 3pt. If you are buying used from a dealer, get a warranty and run the hell out of it during the warranty period. If you are buying used from a private owner,bring someone along that understands diesels or gas and have him check it out . Crank up the 3pt and have yourself and your buddy stand on the arms. they should not sink. Run the bucket against something solid like a big tree and slip the clutch. The wheels should spin and if they don't, the clutch is going and factor in about 1500 to 2000 to replace unless you want to learn how to split a tractor and that is a labor of love. Raise the bucket and let sit there a while while you appreciate the day and see if it sinks. It shouldn't. Check all the hydraulic pistons for leaks especially when they are under load. Check all the pivot points for wear. Check the front tie rods for wear and keep in mind a well maintained diesel will run about 5000 hrs before it needs rebuilding. You got your homework cut out for you. Do it well and you'll get a machine that will be a joy to operate. Screw it up and you'll hate it every time you look at it. Let us know your tractor journey. Bo
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|