Posted by flashback on March 08, 2008 at 18:32:58 from (216.119.6.132):
In Reply to: Re: OT air compressors posted by hillbillyOH on March 08, 2008 at 18:02:18:
That really true about bigger is better but it is the CFM, not the pressure that determines its usefulness. I struggle along with a 4HP 20 gal tank and with the new lowpressure sparay apparatus it does fine. So far in 18 years it has only failed at one job and that was sand blasting where a continuous CFM is critical Even did sandblast some small peices but have gone into electrolysis for that stuff, Much better. LANSE ,Sears has some good ones and so do Lowes Unless you are running it hours at a time the oiless ones are ok and be rebuilt in an hour or two. Make sure you get one that tops out at 175 PSI and preference should try for 30 gals. HTH Jack
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: JB Weld - by Staff. JB Weld is basically an epoxy glue that does an exceptionally good job of bonding to cast iron and steel along with several other materials. As I mentioned, it is so common that I have yet to buy a tractor that did not have JB Weld used somewhere. It is sometimes used so well you can't tell its there and other times used as a sloppy quick fix. Finding where and how it can be used correctly is key to whether you are using it as an "inelegant hack" or an integral solution to difficult and expens
... [Read Article]
Latest Ad:
1945 Farmall wide body gas with pto and front plow. Runs good but needs new points.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
