Tractor Talk Discussion Board |
Re: trailer brakes
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Bill From Ontario on January 12, 2000 at 06:09:32 from (206.172.238.38):
In Reply to: trailer brakes posted by dross on January 12, 2000 at 05:18:44:
I use and have installed the Techonsha 9035 Voyager XP, it's the equivalent to the old 2035 ( with the big heat sink in the back). The 9035 is an easy to use controller that has the power to activate 6 or 8 brakes (3 or 4 axles). I recomend spending the extra $20 and using this model over the less powered one, regardless of how small your trailer is. The mistake people make is using wire that's too small. I use 12gage, and 10 gage, depending on the trailer. You'll need a circuit breaker installed on the power wire from the battery. Also, on the truck/trailer plug (6 or 7 pole) dedicate a ground wire for the lighting ground and a separate one for the brake ground. The intructions for mounting are straight forward, but if you have any questions, post back, and I'll try and help. Bill
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|