Posted by Robert Haessly on April 28, 2008 at 10:22:52 from (165.189.41.11):
I've now had the tractor back for approx two - three weeks and so far so good although I'm only able to work with it on weekends as it is kept on our weekend farm. I bought and old style bumper from Helms. I also bought a new old style tool box from Helms for a special price of only 22.00 because they have a batch of these with bad paint. They were very nice to work with and taped the toolbox to the inside of the front bumper to save on shipping. The bumper was a pain to install because the original axle bolts were welded on!! I broke my Stanley socket wrench(which I had fortified with a pipe wrench) before I realized the nuts were welded. I think the Military might have done that - since it was an ex -military tug. I ended up using an angle grinder to remove the nuts. At any rate its done now and I called Stanley and they are sending me a free replacement driver although I feel a little guilty about the abuse I had done.
I'm very impressed with the 8x2 transmission and 3 point, and pto.
So far only a couple of surprises including; 1 - Missing the two large lower (engine to transmission bolts)!! I noticed this while working on adjusting the brakes. That is just shoddy workmanship. I called the mechanic about this and will be picking up a couple bolts this eve on my way home from work. 2. Brake pedals were rusted together and only seemed to work as a single unit. At first I thought that they were welded together! I greased the zirk fitting on the outer (right) pedal and was finally able to get them freed up, but ended up stretching my brake springs in the process (They were probably as old as the rear end). Once I got the pedals freed up, I realized that the left brake wasn't even engaging as it required some major adjustment! Now I know why the tractor always wanted to pull to the right. 3. I think they only topped off the fluids in the rear end and tranny since they only charged me for several quarts of each. I suspect there is water in the transmission oil as it has a distinct yellowish/foamy color to it. I plan on a total drain and re-fill. 4. The rear end hydraulic fluid looks clear on top as best as I can tell, but I am learning that the filter is internal on the 4000 and hard to get at! I have two extra leftover external hydraulic filters which makes me think the newer 4600 has an exterrnal hyd filter.. Now if I can only find out how to retrofit an external filter somehow.. I think there may be some hydraulics at the front of the engine but not totally sure if that would be a good place to tap in some plumbing. In the meantime, I plan on draining some of the hydrauic fluid to ensure that it is clear, or if not, drain until it runs clear and then top off again. All in all its fun to work with and I am surprised by all that I have learned through this process. I have gained alot of respect for these old Fords and do believe that they made some great tractors back then.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Fordson F Ignition System - by Anthony West. A fellow restorer contacted me earlier this year asking for some help and advice on a model F that he was restoring. He had over a period of months spent a fair amount of his hard earned cash on replacement parts for the old "trembler" ignition. Sadly though all his efforts seemed to be a waste of time and money as he still couldn''t get the temperamental old thing to run correctly!! If i said that this was a little frustrating for him that would be "conservative" in fact the problem had reduce
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
