I don't use one a heck of a lot, but sometimes when a job calls for it, or I've got to fabricate something with steel, the burn/heat time is also important, I hate running out. Aren't these ( one in the photo ) in the 10 cu. ft. size ?
I've got 2 torch rigs set up, made one up for our other place, but brought it back home, (people stealing things like my dads chainsaw, be nice if the law allowed one to use a rosebud on a thief) and I think these are in the 20 cu ft. range, tanks are about waist high, oxy tank is taller.
I get enough burn/heat time out of these, smaller size would really be inconvienent having to refill at the wrong time like a sunday afternoon or in a remote place, so the tank size would concern me. Never knew that the smaller hose and set up may not perform like the next size up like mine, in the heat dept, using smith regulators on both of mine, I think they would also work on full size tanks, they look the same, in '02 got both pairs of new regulators for $100 each pair. The full size tanks are just too big and bulky , best left for a service truck or in a shop, the smaller size like mine is handy to take somewhere, half the weight but enought burn time.
The first torch set I had I actually made up from old regulators, hoses, torch handle I had in an old gangbox, it was so handy and wanting to be safe I upgraded to new regulators, but had a bucket full of em from early 80's contracting days, had the torch handles already, welding supply house had a sale, and I had been buying thousands of dollars of supplies for the company I worked for, got a good deal and set up another rig, definitely happy with this size, a friend was looking at one of those at tsc and I talked him out of it, said a.) I've got a spare rig if you ever need it, just pay for the gas b.) for the money I spent on each with all the little accessories tips and cleaners, it's a really nice set up with enough burn/heat time you won't run out. I'm sure the prices have gone up, but it's nice to wait and get what will serve you best.
I would be interested in hearing any additional comments about those small sets too.
One thing I have found real handy for lower heating type jobs, is the B tank like a plumber/fitter uses for soldering, I have one that does not have the arrangement that makes all that noise like they use, but a single guage and small torch handle, it is efficient for jobs requiring lesser heat, dull red, post & preheat when welding, the tank lasts a long time, don't have to use the oxy/acetylene unless it needs to be glowing red hot or you have to cut. The B tank, acetylene only, seems much hotter than propane or mapp gas, I use it a lot when doing brake jobs.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.