I've had an L3300 GST for about 7 years. Bought it with about 500 hours on it, only put about 500 hours on it since. Absolutely love it. So glad my wife STRONGLY suggested we wait until we could afford it and a loader vs. an 8N or Ferguson. (I still really want a Ferguson 30).
Mechanically I've had to replace the internal 3 pt hitch connecting rod and tighten up the bolts around the clutch housing. Log took out a tire rod, welded it up with 1" angle iron. Carries a Bradco backhoe just fine, crawls thru the woods like a logging machine (fwd), about impossible to get stuck. When the river floods this tractor and cow cubes are the only way to get my cows to high land. It's perfect for fencing. Pulls an 8' Brillion stalk cutter without trouble. The Kubota is my chore tractor where as on a "real" farm I suppose a 656 would be a chore tractor and a 1086 would be the real tractor. Oh well.
What you can do with these in 4x4 and with a loader in my opinion just isn't possible with with a the old 30 horse 2wd ag tractors, except as others have mentioned tillage; they are light for tillage. If you pull a two bottom disc plow you need to have 4x4 on and it moves the back end of the tractor over. I have no weights or fluid in tires so maybe it isn't a fair analysis. My FIL has an L3250. He's replaced a water pump and a 3 pt rockshaft arm (pulling a stump at an angle with a box blade) His is 4 cyl, has about 2,000 hours.
I really like the GST trans, I probably wouldn't buy one with a hydro unless the ONLY thing I was going to do was cut hay. I don't like the fact that you can't operate them standing up, not enough room between steering wheel and seat to do that.
L3300 on Sunday, cut hay for about 4 hours with the JD #9, fuel gauge barely moved.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
