Re: Re: Diesel engine that runs porly

Posted by sjk on February 03, 2000 at 15:15:43 from (198.150.66.200):

In Reply to: Re: Diesel engine that runs porly posted by rod on January 28, 2000 at 05:31:21:

After reading all the Followup and the posted complant, I too agree with the timing being off. You said it is a Simms pump I've only seen one pump like this and it was on a old Fordson. I don't know it the pump has static timing marks. If so check that, however If it starts that hard the pump gear may be a few teeth off, if it's driven off the front gear train. Or is it driven off the camshaft through the oil pump. here too it may be a few teeth off. As for the either its not a good thing to do very often. You can burn valves, and too much could blow the engine. And BE SURE the engine is cranking before spraying and only a very short spray is needed, unless the engine is very tired or very cold out side. And as for timing the pump with the engine running. This a very unsafe pratice I've heard of different rotary pumps blowing off the engine when this was done.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Diesel engine that runs porly Comments: Optional Link URL: Link Title: Optional Image URL:

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]