Posted by JT on June 20, 2008 at 05:58:31 from (70.226.226.105):
In Reply to: zero turns posted by Dave 2N on June 20, 2008 at 03:12:52:
Scag makes a decent zero turn, they are pricey, and depending on where you are, the dealer support system can be a little sparce. They don't have a big dealer netowrk. The fellow that said something about a Bad Boy, he is right, they "look" heavy. I have one in my lot that came from a TSC I do work for, the machien itslef is not bad, the transmissions are the weak link, they don't use a transmission that is comparable to the rest of the unit, it has a hydro transaxle, where a true commercail unit has individual pumps and wheel motors. As for the best, Everide is a real nice mower, again a little pricey, Dixie Chopper is a real good amchine, reasonably priced unless you go with the real big machines. As I tell my customer, you can buy the best machine in the world, but without dealer support, you might as well buy it from a box store. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
