Posted by Erich Ziller on June 21, 2008 at 06:17:48 from (68.114.255.207):
I inherited a Gilson Super Standard Rotary Tiller when my father-in-law passed away back in 1969. It is a Model 10 343 01. I always left gas in it over the winter without using stable and never had to do anything other than engine oil changes and check gear oil level over the past 39 years until today. It would not run loaded---found some cotton wood plugging the carb main jet supply screen. So, I decided to change the plug, points, condencer, & carb diaphram for the first time ever as well as clean out the gas tank. What a fantastic machine! I was wondering what year it was built?---serial number 678175. I have one additional question for anyone familiar with this model. Reverse does not work---hasn't since I obtained it in 1969. Is there a separate belt for reverse? If so, could someone copy me with what size it is. I can only see one belt and have never removed the engine from the tiller. I have no parts list for the tiller but was able to download an engine manual from Briggs & Straton. Thank you for your support.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
