Re: Flywheel ring gear install question

Posted by Joe (Wa) on June 22, 2008 at 22:56:38 from (66.248.39.105):

In Reply to: Flywheel ring gear install question posted by old on June 22, 2008 at 20:18:42:

I've done 2 Case tractors, VAC & 310, in last 2 years, 1 flip and one new, should be about the same as the Ferggie.

Service manual states heat to 560° - 570°F, place on flywheel and quench in water immediately.

I heated in oven set at 550°F one hour on flat surface (grill), laid it on the flywheel shoulder and just sprayed it with a water hose.

I don't think you need that much heat or for that long. The ring gears expanded to good 1/16" larger than the diameter of the flywheel. You have plenty of time to position or rotate how ever you want it.

Joe

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]