Posted by Armand Tatro on June 27, 2008 at 19:15:57 from (98.227.135.78):
In Reply to: Allan's hay posted by KEH on June 27, 2008 at 04:20:02:
If you will look at all tractor 3 points from 706/806 forward(no matter the color) (some others even came out ahead of the 706/806) you will find that they all had narrow fixed hitches from the factory. I have built one hitch from scratch(for an after-market ITCO 3PT. and found a broken M loop to shorten for a TSC hitch. I am now going to build another narrow loop for another TSC. hitch. Once you narrow up that loop you will have the best of both worlds. Opps: forgot to mention that no three is complete until you add the cat. 2 quick hitch. Makes hooking and unhooking much eaiser and keeps those ends from floping around when no inplent is attatched! Armand
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
