Posted by Christos on July 11, 2008 at 21:20:28 from (130.108.192.231):
I went to my friendly not so local AGCO dealer to pick up some parts I needed for my carburator. I had taken off the carburator to my ferguson and some how lost the four screws and the spring. I also since I primed the carburetor decided to pick up a can of flint metalic grey for the heck of it.
I figured the spring would cost the arm and a leg...nope.
Each of those screws from AGCO cost 8 bucks. Thats right $32 for four little screws. That can of paint, 12 bucks.
When I get the total $53 bucks that included the shipping (which I was fine with paying that...its a given these days.) I go to the parts guy you gotta be kidding me. Thats when he told me the unit price and he chuckled.
I realize the laws of supply and demand...I"m taking microeconomics this summer, but how can AGCO justify charging such a high price to cause the dealer to mark it up to 8/screw and with that paint when it was 7 bucks last year!!!
I don"t see how I could be able to afford repainting my tractor using OEM paint - if a can is 12 what could a quart or a gallon be?
I"m only 24 and you know if this is the wave of the future its going to be a sad one for me and my posterity.
I know alot of you think people shouldn"t complain about the cost of parts because they"re availble for machines that are generations old, but its a joke. Even if fuel has caused the almost two fold increase in price for that paint, how can anyone justify its cost at 12 bucks a can? .
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Grain Threshing in the Early 40's - by Jerry D. Coleman. How many of you can sit there and say that you have plowed with a mule? Well I would say not many, but maybe a few. This story is about the day my Grandfather Brown (true name) decided along with my parents to purchase a new Ford tractor. It wasn't really new except to us. The year was about 1967 and my father found a good used Ford 601 tractor to use on the farm instead of "Bob", our old mule. Now my grandfather had had this mule since the mid 40's and he was getting some age on him. S
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
