Look, all the warm and fuzzy platitudes aside about try, try again etc might inspire people but not machines. There are some things that all the trying and best wishes won"t accomplish. Do you not get it? Think this one all the way through. Does any machine operate at 100% efficiency? For example if this hydrogen generator made enough H2 gas to make 10 crankshaft HP. An internal combustion engine runs at 30-40% efficiency. So it would take 30HP worth of hydrogen gas to make 10 crankshaft HP. 10HP of the hydrogen energy goes out the tailpipe as heat. Another 10HP of the hydrogen"s energy goes out the cooling system. The hydrogen generator if working at 67% efficiency would require 45HP of energy in from the alternator. To obtain 45HP from the alternator, it requires at least 55HP input from the crankshaft. So just where and how aside from wishful thinking. How can you gain anything by using 55HP from the engine to make 10HP worth of HP? You are running a 45 HP loss. It"s taking 5.5 units of energy to obtain 1 unit of energy. That"s the wrong way around, that"s called a loss. Are you thinking with emotion or logic. If perpetual motion machines worked? Why are there none out there giving us free energy? The odds of obtaining efficiency gains from a hydrogen generator added to a vehicle. Is the same odds of striking a mother load of gold ore while forking out a horse stable.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
