Hey bud, I got this info from Chainsaw Corner. pretty good stuff.
MANUFACTURED BY: HOMELITE CORPORATION PORT CHESTER, NEW YORK, U.S.A. SERIES OR ASSEMBLY NUMBER: YEAR INTRODUCED: April 1960 YEAR DISCONTINUED: 1961 ENGINE DISPLACEMENT: 5.01 cu. in. NUMBER OF CYLINDERS: 1 CYLINDER BORE: 2.0625 in. (52mm) PISTON STROKE: 1.50 in. (38.1mm) CYLINDER TYPE: Aluminum with chrome plated bore INTAKE METHOD: Reed valve (pyramid with 4 petals) MANUFACTURER ADVERTISED H.P.: 6.6 WEIGHT : 18 lbs (8.16 Kg) powerhead only OPERATOR CONFIGURATION: One Man operation HANDLEBAR SYSTEM: rigid CHAIN BRAKE: none CLUTCH: Centrifugal DRIVE TYPE: Direct CONSTRUCTION: Die cast magnesium MAGNETO TYPE: Phelon CARBURETOR: Tillotson HL-46B, HL104A Brown 6-CP MAJOR REPAIR KIT: RK-88HL for HL-104A MINOR REPAIR KIT: DG-5HL for HL-104A AIR FILTER SYSTEM: Wix pleated paper element STARTER TYPE: Fairbanks Morse automatic rewind OIL PUMP: Manual OPERATING RPM: 6,000 IGNITION TIMING: fixed BREAKER POINT SETTING: 0.015 in. (0.38mm) FLYWHEEL/COIL AIR GAP: fixed SPARK PLUG TYPE: Champion J6J SPARK PLUG GAP: 0.025 in. (0.63mm) CRANKSHAFT MAIN BEARINGS: Ball and caged needle roller FUEL TANK CAPACITY: 45 oz. (1.33 litres) FUEL OIL RATIO: 1/2 pint to 1 gallon with Homelite oil RECOMMENDED FUEL OCTANE: Regular MIX OIL SPECIFICATION: Homelite chain saw mix oil CHAIN PITCH: 7/16 in. CHAIN TYPE: Oregon 62C BAR MOUNT PATTERN: SHORTEST GUIDE BAR SUPPLIED: 14 in. (35cm) LONGEST GUIDE BAR SUPPLIED: 28 in. (71cm) COLOUR SCHEME: Homelite Red with Canyon Green starter cover PAINT CODES: ILLUSTRATED PARTS LIST: SERVICE MANUAL:
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
