Posted by BillinCentralMO on August 05, 2008 at 17:31:14 from (65.54.154.113):
In Reply to: Purchasing a tractor posted by Patrick7 on August 05, 2008 at 06:51:21:
I would first determine , will you need to move the tractor ? If you plan on hauling it , paying someone to haul it or if you will need to take it to the shop in town for repairs , then size is a consideration.I have a Massey 165 and you can haul it on a tandem trailer and pull it with a midsize pickup. You get much bigger than that and you'll need a big rig to haul it which probably will be pricey. If it will stay on the farm and you fix it yourself , buy as large as you can afford.I have seen some nice tractyors for 4500. However if you go up to about $6000 I think you'll notice the difference in a short time. The tractors I have seen lately , 40 hp or more, rasonable good condition seem to be in the 5 to 7 thousand dollar range. I have seen some massey 135's and JD 1010's for $5000 or less. The thing is though , you get the Suburban stuck good ( or your visiting brother in law does), that 135 won't pull it out. Its off to the neighbors to get the 4020 or 1130 and pull out the small tractor and the suburban. Do you have alot of hills ? If so heighth is a consideration and I would stay away from narrow front ends. I'd start looking and promise myself I am not buying until I've seen 5 or 6 at least. It is great fun to look. I do it even when I am not buying. But there is alot of junk out there for sale too. If you are not mechanical , consider having your mechanic check it out. Good Luck. Post a photo when you buy one , so we know how the saga ends.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - 12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.