I've been home builder-general contractor for 31 years. When someone asks what a house costs per square foot, I tell them do you buy a car by the pound? A larger sq. ft. one has some of the same costs as a smaller one. The furnace, cabinets, baths, land, driveway, basic wiring will be the same for a 1200 sq. ft. as for a 1500. One might have 9ft. ceilings, cathedral ceilings, or flat ones. Windows can vary by the thousands of dollars. The last house I did, I had a bid of $8300 for cabinets that I gave in my proposal. After the homeowners got done visiting the cabinet shop, the cost went to $11,500. Vinyl in the kitchen and dining or hardwood or tile? Granite counter tops or formica? The best thing to do is get a print in your hands of the house you want and get the estimates either from a contractor or go out and find all the subs and be willing to deal with them having to deal directly with the homeowner. I've did more than one that started out as a sketch on a piece of paper and after weeks of back and forth was able to turn it into a buildable house plan.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
