Posted by Bill(Wis) on October 02, 2008 at 16:29:40 from (71.249.198.251):
In Reply to: Flipping Fordson posted by Judy Wearing on October 02, 2008 at 11:31:27:
About the only thing left to relate that hasn't been covered below is my bachelor uncle's experience. At some point in the little bit of evolution the Fordson saw, Henry Ford, in an attempt to prevent the back flips the fordson was famous for, installed the big fenders that stopped the tractor from going completely over on every Fordson sold. Prior to that they had been an option for $50 or so extra. My uncle was able to get one of the last new ones without that option. He was quite pleased that he had saved $50. The Fordson was not without it's little quirks. One of them being hard to start when hot. Another was having no brakes. Another was that, while idling, they had a bad habit of jumping into gear all on their own. Farmers who came in at noon for lunch and left them running would sometimes see them going across the lawn all on their own. My uncle had his Fordson sitting in the yard idling while he was working nearby. The Fordson, true to form, jumped into gear and headed straight for the silo. My uncle couldn't catch it before it plowed into the silo, climbed right up the silo and did one of it's famous back flips and, in spite of being made almost completely of steel, caught fire and burned beyond recognition. We all had a good laugh about that. My uncle went into town and bought another tractor.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.