Tractor Talk Discussion Board |
Re: Farmall B Radiator
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Phil on March 31, 2000 at 12:41:41 from (128.63.168.66):
In Reply to: Farmall B Radiator posted by Jeff Gander on March 30, 2000 at 09:59:17:
I just went through this process with my B. Apparently they don't make aftermarket radiators to fit a B. I went to a couple of radiator shops and dealers and they looked in their catalogs and couldn't find any. It can possibly be repaired depending on where the leak is. Mine had a leak around one of the bolts on the bottom tank and I was told by two reputable repair shops that any fix would be a "patch job". The bottom and top tanks are crimped and they couldn't take the tank apart and put it back together so the repair would be done from the outside and it would just be a patch. I ended up buying a used radiator, there are plenty of them around. If you are going to have one pressure tested I would also have it tested for flow. I don't know what the flow rate should be but a radiator shop should be able to tell you whether it has good flow or not.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|