Posted by john in la on November 22, 2008 at 23:14:10 from (74.241.117.100):
I know this is not about tractors but I need some help from a Mercury outboard mechanic. I have asked on several outboard sites with no results.
I have a 1973 model 200 (20hp) serial #3540395 It is pull start and has electronic ignition now. I want to convert it to electric start with a battery charging system.
I know some of the parts are NLA but that does not bother me. I am use to finding NOS parts with all these old things I work on.
The electric start is easy because I already have the flywheel with a ring gear. I know I will need a starter and a solenoid for this.
What I am having trouble with is the battery charging. I have been looking threw 3 differant parts diagrams (group 14; 15 and 16) that go with this motor and they list several stators. They also list a rectifier on one diagram and a voltage regulator on a differant diagram. Can someone help me understand this and walk me threw what parts I may need to change or add to make this work.
I will give you a link to a parts diagram page if that will help you help me. Thanks for the help. John
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.