Posted by blinwmi on December 22, 2008 at 19:58:49 from (75.129.101.40):
In Reply to: Cover-All buildings posted by MadCoMike on December 22, 2008 at 18:01:07:
I don't know why people in Iowa would be seeing opposite results of what I have seen in my travels in Michigan, Wisconsin and Indiana. In my local area CoverAlls are becoming very common for the horse folks, mostly for indoor arenas but several have stalls in them also. I know of close to 15 CoverAll structures at dairy farms. Moat of these barns are built on a short pony wall and are stout as heck. I have looked into them for the last 3 or 4 years to be used for a tie stall dairy barn. There is one woman in Northern New York and 2 somewhere up in Canada that milk cows in them. I haven't seen them but have seen a photo display book of the one in New York and have talked to the lady on the phone. I have yet to hear anyone who actually has one, wish they had built anything else. And as far as insurability, the one I see most often is a friends horse boarding setup, and was very easy to insure thru Farm Bureau. Come to think of it, I can't understand why they would be hard to insure. The way they are anchored to the foundation or pony wall is as solid as any stick built barn on a footer. The tarp covers have great warranties on them now, so the technology has come along way in the last 15 years. I don't have one yet personally but have done my homework on the Cover All brand barns and would not be afraid to put one in use, even with West Michiagn winds and weather.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
